Search for Motors Automatically Find Motors Login or Edit Settings Data File Outbox ThrustCurve.org home ThrustCurve.org

Motor Guide Results

Here is your handy guide to the motors that might work with your rocket. We found 20 motors that fit and appear to have enough thrust (762 motors didn't fit, 9 motors failed safety checks). 29 motor had thrust curves available and 52 flight simulations were performed. Browse the motors that did and didn't work right here or download the results as a spreadsheet.

The Rocket

Rocket Name:   Magician
Owner: Wayne Comfort
Body Diameter: 1.33in
Dry Weight: 5.5oz
MMT Diameter: 24.0mm
MMT Length: 3.75in
CD: 0.70

Motors That Work

These motors fit your rocket and appear to have enough thrust to lift it safely. If thrust curves are available, a quick simulation has been run to give a rough idea of the performance of your rocket on this motor. We encourage you to run a more complete simulation with any motor you plan to use; see the simulators page for more info.

  Motor Weight Launch Velocity Accel Altitude Time Delay
warningsW Estes D12 7.0oz 55ft/s 219ft/s 14.4G 724ft 7.0s 5s
OK Estes D11 7.1oz 51ft/s 220ft/s 12.4G 753ft 7.2s 5s
OK AeroTech D15 7.2oz 58ft/s 256ft/s 14.1G 857ft 7.1s 6s
OK Cesaroni E22 7.5oz 49ft/s 327ft/s 13.6G 1,101ft 7.9s 7s
OK Cesaroni E75 7.3oz 99ft/s 380ft/s 44.8G 1,138ft 7.6s 7s
OK Cesaroni E31 7.3oz 60ft/s 368ft/s 18.9G 1,219ft 8.1s 7s
warningsW Estes E12 7.6oz 51ft/s 308ft/s 14.7G 1,264ft 8.9s 6s
OK Estes E30 7.2oz 72ft/s 476ft/s 23.7G 1,601ft 8.8s 8s
OK AeroTech E20 7.2oz 64ft/s 436ft/s 16.3G 1,658ft 9.2s 7s
OK AeroTech E18 7.6oz 58ft/s 442ft/s 13.7G 1,821ft 9.6s 7s
OK AeroTech E28 7.5oz 77ft/s 516ft/s 23.5G 1,836ft 9.3s 8s
OK AeroTech E30 7.2oz 77ft/s 531ft/s 23.3G 1,850ft 9.3s 8s
OK AeroTech F44 7.2oz 84ft/s 610ft/s 31.8G 1,921ft 9.3s 8s
OK AeroTech E15 7.2oz 57ft/s 436ft/s 13.4G 1,934ft 10.0s 7s
OK AeroTech F12 7.9oz 48ft/s 444ft/s 9.6G 1,989ft 10.3s 7s
OK AeroTech F30 8.0oz 61ft/s 567ft/s 16.2G 2,082ft 9.9s 8s
OK AeroTech F24 7.7oz 65ft/s 521ft/s 18.3G 2,174ft 10.2s 8s
OK AeroTech F39 7.6oz 83ft/s 617ft/s 27.1G 2,194ft 9.9s 9s
OK AeroTech F35 8.5oz 78ft/s 639ft/s 23.7G 2,410ft 10.4s 9s
OK AeroTech F32 7.8oz 82ft/s 653ft/s 26.4G 2,441ft 10.4s 8s

W Motor total weight unknown, lift-off Weight not accurate.

Don't like the units? Login to set your preferences. Don't understand the results? See the motor guide help page.

Motors That Fail

These motors fit your rocket, but failed one safety check or another. They may actually work, but you should use them only with caution. We encourage you to run a more complete simulation to verify flight safety; see the simulators page for more info.

  Motor Reason
failedG Estes C11 speed at end of launch guide too slow (46ft/s)
failedG AeroTech D7 speed at end of launch guide too slow (35ft/s)
failedG AeroTech D9 speed at end of launch guide too slow (37ft/s)
failedG Estes E9 speed at end of launch guide too slow (42ft/s)
failedG AeroTech E7 speed at end of launch guide too slow (35ft/s)
failedG AeroTech E11 speed at end of launch guide too slow (42ft/s)
failedG AeroTech E12 speed at end of launch guide too slow (43ft/s)
failedG AeroTech E6 speed at end of launch guide too slow (34ft/s)
failedG Apogee E6 speed at end of launch guide too slow (47ft/s)

G These simulations were run with a launch guide length of 4ft (rod, rail or tower). If this is not correct, launch guide lengths can be specified for your saved rockets. (The minimum velocity required is approximately 15m/s or 50ft/s.)

Download the Results

The data is presented in a compact form in the tables above, broken down by motors that worked and those that did not. If you would like to analyze the data further, this section provides download links for files in a generic spreadsheet format (comma-separated value, or CSV) that can be opened with almost any spreadsheet program.

CSV Excel   Download full details of the simulation runs with the various motors:
that worked, that failed, or all of them.
 
RockSim   Download the list of motors that fit your rocket into a batch for use with SMARTSim. (See the Simulators page for more info.)

You should download these files to your machine and then open them. Normally, clicking the link will prompt you to do this. However, if your browser insists on opening the file as plain text, you can right-click (control-click on the Mac) on the link and chose Save File As (or similar).

---
ThrustCurve.org home