Motor Guide Results

Here is your handy guide to the motors that might work with your rocket. We found 15 motors that fit and appear to have enough thrust (787 motors didn't fit, 3 motors failed safety checks). 18 motor had thrust curves available and 33 flight simulations were performed. Browse the motors that did and didn't work right here or download the results as a spreadsheet.

The Rocket

Motors That Work

These motors fit your rocket and appear to have enough thrust to lift it safely. If thrust curves are available, a quick simulation has been run to give a rough idea of the performance of your rocket on this motor. We encourage you to run a more complete simulation with any motor you plan to use; see the simulators page for more info.

	Motor	Weight	Launch	Velocity	Accel	Altitude	Time	Delay
W	Estes 1/2A6	1.9oz	48ft/s	61ft/s	14.4G	61ft	2.1s	2s
	Quest A6	1.8oz	54ft/s	121ft/s	22.7G	205ft	3.7s	3s
W	Estes A8	1.9oz	52ft/s	115ft/s	17.2G	207ft	3.8s	3s
W	Estes B4	2.1oz	58ft/s	214ft/s	20.4G	560ft	5.8s	5s
	Estes B6	1.9oz	57ft/s	226ft/s	22.0G	561ft	5.7s	5s
W	Quest B6	2.0oz	57ft/s	247ft/s	25.9G	603ft	5.8s	5s
W	Estes C5	2.3oz	64ft/s	346ft/s	34.1G	1,151ft	7.7s	6s
	Quest C6	2.1oz	64ft/s	348ft/s	30.1G	1,160ft	7.8s	6s
	AeroTech C3	2.2oz	51ft/s	259ft/s	13.5G	1,177ft	8.2s	5s
W	Estes C6	2.2oz	56ft/s	364ft/s	20.7G	1,184ft	7.9s	6s
	AeroTech D10	2.3oz	81ft/s	668ft/s	36.3G	1,913ft	8.5s	7s
	AeroTech D21	2.3oz	94ft/s	784ft/s	49.1G	1,916ft	8.3s	7s
	AeroTech D24	2.5oz	99ft/s	751ft/s	56.1G	1,959ft	8.6s	8s
	AeroTech D13	2.5oz	76ft/s	640ft/s	31.5G	1,971ft	8.8s	7s
	AeroTech D2	2.4oz	50ft/s	248ft/s	13.9G	2,368ft	13.2s	5s

W Motor total weight unknown, lift-off Weight not accurate.

Don't like the units? Login to set your preferences. Don't understand the results? See the motor guide help page.

Motors That Fail

These motors fit your rocket, but failed one safety check or another. They may actually work, but you should use them only with caution. We encourage you to run a more complete simulation to verify flight safety; see the simulators page for more info.

	Motor	Reason
G	SCR A3	speed at end of launch guide too slow (41ft/s)
G	SCR B4	speed at end of launch guide too slow (42ft/s)
G	SCR C3	speed at end of launch guide too slow (40ft/s)

G These simulations were run with a launch guide length of 3ft (rod, rail or tower). If this is not correct, launch guide lengths can be specified for your saved rockets. (The minimum velocity required is approximately 15m/s or 50ft/s.)

Download the Results

The data is presented in a compact form in the tables above, broken down by motors that worked and those that did not. If you would like to analyze the data further, this section provides download links for files in a generic spreadsheet format (comma-separated value, or CSV) that can be opened with almost any spreadsheet program.

		Download full details of the simulation runs with the various motors: that worked, that failed, or all of them.
		Download the list of motors that fit your rocket into a batch for use with SMARTSim. (See the Simulators page for more info.)

You should download these files to your machine and then open them. Normally, clicking the link will prompt you to do this. However, if your browser insists on opening the file as plain text, you can right-click (control-click on the Mac) on the link and chose Save File As (or similar).