Search for Motors Automatically Find Motors Login or Edit Settings Data File Outbox ThrustCurve.org home ThrustCurve.org

Motor Guide Results

Here is your handy guide to the motors that might work with your rocket. We found 23 motors that fit and appear to have enough thrust (760 motors didn't fit, 8 motors failed safety checks). 31 motor had thrust curves available and 54 flight simulations were performed. Browse the motors that did and didn't work right here or download the results as a spreadsheet.

The Rocket

Rocket Name:   Mega Mosquito
Owner: Richard Holmes
Body Diameter: 66.0mm
Dry Weight: 147g
MMT Diameter: 24.0mm
MMT Length: 5.00in
CD: 0.60

Motors That Work

These motors fit your rocket and appear to have enough thrust to lift it safely. If thrust curves are available, a quick simulation has been run to give a rough idea of the performance of your rocket on this motor. We encourage you to run a more complete simulation with any motor you plan to use; see the simulators page for more info.

  Motor Weight Launch Velocity Accel Altitude Time Delay
warningsW Estes C11 182g 15m/s 39m/s 11.2G 67m 3.8s 3s
warningsW Estes D12 190g 16m/s 58m/s 15.0G 144m 5.3s 4s
OK Estes D11 192g 15m/s 58m/s 12.9G 150m 5.5s 4s
OK AeroTech D15 194g 19m/s 71m/s 14.7G 160m 5.2s 4s
OK Cesaroni E75 199g 30m/s 114m/s 46.9G 184m 5.1s 5s
OK Cesaroni E22 204g 16m/s 91m/s 14.2G 192m 5.5s 4s
OK Cesaroni E31 199g 19m/s 103m/s 19.8G 202m 5.5s 5s
warningsW Estes E12 207g 16m/s 72m/s 15.2G 226m 6.5s 4s
OK Estes E30 194g 23m/s 122m/s 24.8G 244m 5.7s 5s
OK AeroTech E20 196g 20m/s 107m/s 17.1G 260m 6.1s 4s
OK AeroTech E30 194g 25m/s 132m/s 24.4G 274m 5.9s 5s
OK AeroTech F44 195g 24m/s 160m/s 31.9G 274m 5.8s 5s
OK AeroTech E28 202g 24m/s 128m/s 24.4G 275m 6.0s 5s
OK AeroTech E18 206g 19m/s 107m/s 14.3G 287m 6.4s 4s
OK AeroTech E15 195g 17m/s 96m/s 14.0G 309m 6.8s 4s
OK AeroTech F30 218g 19m/s 137m/s 16.3G 311m 6.4s 5s
OK Cesaroni F51 220g 23m/s 157m/s 29.8G 312m 6.2s 5s
OK Cesaroni F70 220g 30m/s 178m/s 43.3G 315m 6.1s 5s
OK AeroTech F39 208g 26m/s 146m/s 28.2G 318m 6.2s 5s
OK AeroTech F12 216g 15m/s 101m/s 10.0G 320m 7.0s 4s
OK AeroTech F24 210g 21m/s 121m/s 19.0G 330m 6.6s 4s
OK AeroTech F35 232g 23m/s 152m/s 24.6G 352m 6.5s 5s
OK AeroTech F32 211g 26m/s 147m/s 27.6G 355m 6.6s 5s

W Motor total weight unknown, lift-off Weight not accurate.

Don't like the units? Login to set your preferences. Don't understand the results? See the motor guide help page.

Motors That Fail

These motors fit your rocket, but failed one safety check or another. They may actually work, but you should use them only with caution. We encourage you to run a more complete simulation to verify flight safety; see the simulators page for more info.

  Motor Reason
failedG AeroTech D7 speed at end of launch guide too slow (11m/s)
failedG AeroTech D9 speed at end of launch guide too slow (11m/s)
failedG Estes E9 speed at end of launch guide too slow (13m/s)
failedG AeroTech E7 speed at end of launch guide too slow (11m/s)
failedG AeroTech E11 speed at end of launch guide too slow (13m/s)
failedG AeroTech E12 speed at end of launch guide too slow (14m/s)
failedG AeroTech E6 speed at end of launch guide too slow (11m/s)
failedG Apogee E6 speed at end of launch guide too slow (14m/s)

G These simulations were run with a launch guide length of 1m (rod, rail or tower). If this is not correct, launch guide lengths can be specified for your saved rockets. (The minimum velocity required is approximately 15m/s or 50ft/s.)

Download the Results

The data is presented in a compact form in the tables above, broken down by motors that worked and those that did not. If you would like to analyze the data further, this section provides download links for files in a generic spreadsheet format (comma-separated value, or CSV) that can be opened with almost any spreadsheet program.

CSV Excel   Download full details of the simulation runs with the various motors:
that worked, that failed, or all of them.
 
RockSim   Download the list of motors that fit your rocket into a batch for use with SMARTSim. (See the Simulators page for more info.)

You should download these files to your machine and then open them. Normally, clicking the link will prompt you to do this. However, if your browser insists on opening the file as plain text, you can right-click (control-click on the Mac) on the link and chose Save File As (or similar).

---
ThrustCurve.org home