Motor Guide Results

Here is your handy guide to the motors that might work with your rocket. We found 20 motors that fit and appear to have enough thrust (772 motors didn't fit, 11 motors failed safety checks). 31 motor had thrust curves available and 55 flight simulations were performed. Browse the motors that did and didn't work right here or download the results as a spreadsheet.

The Rocket

Motors That Work

These motors fit your rocket and appear to have enough thrust to lift it safely. If thrust curves are available, a quick simulation has been run to give a rough idea of the performance of your rocket on this motor. We encourage you to run a more complete simulation with any motor you plan to use; see the simulators page for more info.

	Motor	Weight	Launch	Velocity	Accel	Altitude	Time	Delay
W	Estes D12	8.0oz	50ft/s	185ft/s	12.4G	566ft	6.3s	5s
	AeroTech D15	8.2oz	54ft/s	221ft/s	12.2G	685ft	6.4s	5s
	Cesaroni E22	8.5oz	48ft/s	284ft/s	11.8G	891ft	7.2s	6s
	Cesaroni E75	8.3oz	90ft/s	332ft/s	39.3G	926ft	7.0s	7s
	Cesaroni E31	8.3oz	56ft/s	320ft/s	16.5G	991ft	7.4s	7s
W	Estes E12	8.6oz	52ft/s	263ft/s	12.8G	1,023ft	8.2s	6s
	Estes E30	8.2oz	69ft/s	413ft/s	20.6G	1,320ft	8.1s	7s
	AeroTech E20	8.2oz	60ft/s	377ft/s	14.2G	1,366ft	8.5s	7s
	AeroTech E18	8.6oz	55ft/s	384ft/s	12.0G	1,508ft	8.9s	7s
	AeroTech E28	8.5oz	74ft/s	450ft/s	20.5G	1,524ft	8.6s	7s
	AeroTech E30	8.2oz	73ft/s	461ft/s	20.3G	1,537ft	8.6s	7s
	AeroTech E15	8.2oz	55ft/s	377ft/s	12.3G	1,543ft	9.1s	7s
	AeroTech F44	8.2oz	73ft/s	530ft/s	27.7G	1,601ft	8.6s	8s
	AeroTech F62	9.6oz	72ft/s	525ft/s	26.0G	1,667ft	8.9s	8s
	AeroTech F30	9.0oz	58ft/s	495ft/s	14.2G	1,740ft	9.2s	8s
	AeroTech F63	9.4oz	80ft/s	554ft/s	27.1G	1,763ft	9.0s	8s
	AeroTech F24	8.7oz	62ft/s	455ft/s	16.0G	1,814ft	9.4s	7s
	AeroTech F39	8.6oz	80ft/s	539ft/s	23.8G	1,837ft	9.2s	8s
	AeroTech F35	9.5oz	70ft/s	563ft/s	21.1G	2,025ft	9.6s	8s
	AeroTech F32	8.8oz	75ft/s	570ft/s	23.3G	2,055ft	9.7s	8s

W Motor total weight unknown, lift-off Weight not accurate.

Don't like the units? Login to set your preferences. Don't understand the results? See the motor guide help page.

Motors That Fail

These motors fit your rocket, but failed one safety check or another. They may actually work, but you should use them only with caution. We encourage you to run a more complete simulation to verify flight safety; see the simulators page for more info.

	Motor	Reason
G	Estes C11	speed at end of launch guide too slow (44ft/s)
G	Estes D11	speed at end of launch guide too slow (47ft/s)
G	AeroTech D7	speed at end of launch guide too slow (32ft/s)
G	AeroTech D9	speed at end of launch guide too slow (35ft/s)
G	Estes E9	speed at end of launch guide too slow (39ft/s)
G	AeroTech E7	speed at end of launch guide too slow (32ft/s)
G	AeroTech E11	speed at end of launch guide too slow (41ft/s)
G	AeroTech E12	speed at end of launch guide too slow (39ft/s)
G	AeroTech E6	speed at end of launch guide too slow (32ft/s)
G	Apogee E6	speed at end of launch guide too slow (42ft/s)
G	AeroTech F12	speed at end of launch guide too slow (45ft/s)

G These simulations were run with a launch guide length of 4ft (rod, rail or tower). If this is not correct, launch guide lengths can be specified for your saved rockets. (The minimum velocity required is approximately 15m/s or 50ft/s.)

Download the Results

The data is presented in a compact form in the tables above, broken down by motors that worked and those that did not. If you would like to analyze the data further, this section provides download links for files in a generic spreadsheet format (comma-separated value, or CSV) that can be opened with almost any spreadsheet program.

		Download full details of the simulation runs with the various motors: that worked, that failed, or all of them.
		Download the list of motors that fit your rocket into a batch for use with SMARTSim. (See the Simulators page for more info.)

You should download these files to your machine and then open them. Normally, clicking the link will prompt you to do this. However, if your browser insists on opening the file as plain text, you can right-click (control-click on the Mac) on the link and chose Save File As (or similar).