Search for Motors Automatically Find Motors Login or Edit Settings Data File Outbox ThrustCurve.org home ThrustCurve.org

Motor Guide Results

We were unable to find any motors that would work with your rocket; please check that the dimensions of your rocket are correct, especially the motor mount tube (801 motors didn't fit, 1 motors failed safety checks). One motor had thrust curves available and 3 flight simulations were performed.

The Rocket

Rocket Name:   VIKAS MK1
Owner: GOKUL KANNAN S.R
Body Diameter: 400.0cm
Dry Weight: 5.000Kg
MMT Diameter: 5.1mm
MMT Length: 5.12in
CD: 0.50
Web Site: www.rocket.com

Motors That Fail

These motors fit your rocket, but failed one safety check or another. They may actually work, but you should use them only with caution. We encourage you to run a more complete simulation to verify flight safety; see the simulators page for more info.

  Motor Reason
failed5 Quest Micro Maxx average thrust fails 5:1 thrust/weight ratio (0:1)

5 The 5:1 thrust-to-weight ratio check is a useful rule of thumb, but it does break down for motors with unusual thrust curves. For example, motors with a high initial thrust and a long tail-off may fail this test but still be safe for use.

Download the Results

The data is presented in a compact form in the tables above, broken down by motors that worked and those that did not. If you would like to analyze the data further, this section provides download links for files in a generic spreadsheet format (comma-separated value, or CSV) that can be opened with almost any spreadsheet program.

CSV Excel   Download full details of the simulation runs with the various motors:
that worked, that failed, or all of them.
 
RockSim   Download the list of motors that fit your rocket into a batch for use with SMARTSim. (See the Simulators page for more info.)

You should download these files to your machine and then open them. Normally, clicking the link will prompt you to do this. However, if your browser insists on opening the file as plain text, you can right-click (control-click on the Mac) on the link and chose Save File As (or similar).

---
ThrustCurve.org home