Search for Motors Automatically Find Motors Login or Edit Settings Data File Outbox ThrustCurve.org home ThrustCurve.org

Motor Guide Results

Here is your handy guide to the motors that might work with your rocket. We found 14 motors that fit and appear to have enough thrust (760 motors didn't fit, 17 motors failed safety checks). 31 motor had thrust curves available and 54 flight simulations were performed. Browse the motors that did and didn't work right here or download the results as a spreadsheet.

The Rocket

Rocket Name:   The Redneck
Owner: Jim Lane
Body Diameter: 2.60in
Dry Weight: 15.0oz
MMT Diameter: 24.0mm
MMT Length: 4.00in
CD: 0.60

Motors That Work

These motors fit your rocket and appear to have enough thrust to lift it safely. If thrust curves are available, a quick simulation has been run to give a rough idea of the performance of your rocket on this motor. We encourage you to run a more complete simulation with any motor you plan to use; see the simulators page for more info.

  Motor Weight Launch Velocity Accel Altitude Time Delay
OK Cesaroni E75 16.8oz 80ft/s 158ft/s 18.9G 323ft 4.4s 4s
OK Cesaroni E31 16.8oz 49ft/s 148ft/s 7.7G 336ft 4.8s 4s
OK Estes E30 16.7oz 56ft/s 194ft/s 9.6G 511ft 5.6s 5s
OK AeroTech E20 16.7oz 49ft/s 175ft/s 6.5G 518ft 5.9s 4s
OK AeroTech E28 17.0oz 59ft/s 218ft/s 9.7G 631ft 6.2s 5s
OK AeroTech E30 16.7oz 60ft/s 220ft/s 9.4G 638ft 6.2s 5s
OK AeroTech F44 16.7oz 70ft/s 254ft/s 13.0G 693ft 6.3s 5s
OK AeroTech F30 17.5oz 50ft/s 244ft/s 6.8G 759ft 6.9s 5s
OK AeroTech F24 17.2oz 53ft/s 224ft/s 7.6G 783ft 7.0s 5s
OK Cesaroni F51 17.6oz 64ft/s 276ft/s 12.6G 817ft 6.8s 6s
OK AeroTech F39 17.1oz 67ft/s 269ft/s 11.5G 833ft 6.9s 6s
OK Cesaroni F70 17.6oz 79ft/s 306ft/s 18.5G 877ft 6.9s 6s
OK AeroTech F35 18.0oz 60ft/s 292ft/s 10.6G 953ft 7.4s 6s
OK AeroTech F32 17.3oz 63ft/s 288ft/s 11.3G 971ft 7.6s 6s

Don't like the units? Login to set your preferences. Don't understand the results? See the motor guide help page.

Motors That Fail

These motors fit your rocket, but failed one safety check or another. They may actually work, but you should use them only with caution. We encourage you to run a more complete simulation to verify flight safety; see the simulators page for more info.

  Motor Reason
failedG Estes C11 speed at end of launch guide too slow (29ft/s)
failedG Estes D12 speed at end of launch guide too slow (32ft/s)
failedG Estes D11 speed at end of launch guide too slow (30ft/s)
failedG AeroTech D7 speed at end of launch guide too slow (22ft/s)
failedG AeroTech D9 speed at end of launch guide too slow (31ft/s)
failedG AeroTech D15 speed at end of launch guide too slow (45ft/s)
failedG Cesaroni E22 speed at end of launch guide too slow (40ft/s)
failedG Estes E12 speed at end of launch guide too slow (37ft/s)
failedG Estes E9 speed at end of launch guide too slow (25ft/s)
failedG AeroTech E7 speed at end of launch guide too slow (23ft/s)
failedG AeroTech E11 speed at end of launch guide too slow (33ft/s)
failedG AeroTech E12 speed at end of launch guide too slow (32ft/s)
failedG AeroTech E18 speed at end of launch guide too slow (46ft/s)
failedG AeroTech E6 speed at end of launch guide too slow (23ft/s)
failedG Apogee E6 speed at end of launch guide too slow (30ft/s)
failedG AeroTech E15 speed at end of launch guide too slow (40ft/s)
failedG AeroTech F12 speed at end of launch guide too slow (37ft/s)

G These simulations were run with a launch guide length of 6ft (rod, rail or tower). If this is not correct, launch guide lengths can be specified for your saved rockets. (The minimum velocity required is approximately 15m/s or 50ft/s.)

Download the Results

The data is presented in a compact form in the tables above, broken down by motors that worked and those that did not. If you would like to analyze the data further, this section provides download links for files in a generic spreadsheet format (comma-separated value, or CSV) that can be opened with almost any spreadsheet program.

CSV Excel   Download full details of the simulation runs with the various motors:
that worked, that failed, or all of them.
 
RockSim   Download the list of motors that fit your rocket into a batch for use with SMARTSim. (See the Simulators page for more info.)

You should download these files to your machine and then open them. Normally, clicking the link will prompt you to do this. However, if your browser insists on opening the file as plain text, you can right-click (control-click on the Mac) on the link and chose Save File As (or similar).

---
ThrustCurve.org home